Industrial Products


Three Pole Switch – 630A 12kV AC & Manual Earth Switch Version
Isolation of transformer & motor supplies for general maintenance or operational requirements
Three Pole Switch & Manual Earth Switch – 630A 12kV AC
Isolation of 3kV, 6.6kV and 12kV transformer & motor supplies


Supply Overcurrent Protection Panel
The Panel is designed to provide a signal to a Load Shedding Panel that supplies the Air Conditioning. This enables the Air Conditioning load to be shed under any of the following three conditions in order to minimise the load on the DNO Supply:


Medium Voltage Circuit Breaker Automation
Give a new lease of life to your old circuit breakers. Automation kits are the economic solution compared to replacing old circuit breakers with new automated breakers
Short lead times until installation
Short down time when installation is taking place
Increased safety for the operator


MV TIL & TIR - Medium Voltage Twin Isolator Left & Right Hand – 430A 3.3 to 12kV
Isolation of Medium Voltage motor / transformer supplies, 3.3kV to 12kV, for maintenance.


MV I- Medium Voltage Isolator – 300A 3.3kV
Isolation of Medium Voltage motor / transformer supplies, 3.3kV, for maintenance.


Industrial Isolators 40A - 1600A 1000V AC
Multi-pole construction 2, 3 or 4 pole standard, On Load Disconnector
Visible breaking contacts (through window).
High speed mechanism
Silver plated copper contacts.
Breaking chambers on all poles made from GRP (UL 94 VO)
High make and break capacity (AC23 & DC23 rating)


Industrial Isolator Heavy Duty 500A 1000V AC/DC
3 pole Off Load Disconnector
Visible breaking contacts (through window).
Silver plated copper contacts


D.N.O. Distribution Panel
The D.N.O. (Distribution Network Operator) Distribution Panel for various applications including Points Heating supplies, consisting of a 200A Isolator, a 200A Fuse Switch and two 100A Fuse Switches.
The panel is also fitted with an Internal Light, Anti-Condensation heaters and a 30mA RCD protected 230V 13A Switched Socket.


Compactor & Baler Control Panels
A series of control panels which provide motor control for Waste Compactors and Balers with various special options.


4 Pole Isolating and Bonding Unit - 415V AC 250A
Isolating and Bonding Unit for a nuclear research centre Magnet power supply.


4 Pole Changeover Isolator - Voltage 750V AC - Current: 1000A
4 pole construction
Typical Application
Changeover of supply from Furnace 1 to Furnace 2 in steelworks, where a high degree of protection & reliability is required.


2 Pole Bonding Changeover Switch Panel (twin isolators)
250V DC supply is derived from the Magnet Power Supply.
The 250V DC is fed to the respective 2 pole disconnector, via 2 x 150mm2 cables coming in from the base of the enclosure