Underground GJL Replacement Conductor Rail Gap Jumper Shoes (Pair)
+44 (0)1273 770540

Underground GJL Replacement Conductor Rail Gap Jumper Shoes (Pair)

Product Image











GJL Replacemant Conductor Rail Gap Jumper Shoes (Pair) for London Underground

Application Off Load

The Gap Jumper Lead is used to connect a supply to a stranded (Gapped) Train.

This is where a train current collector shoe (pick up shoe) is no longer in connection with the power supply conductor rails.


Material Micam EM42 ABS and Brass

To assist with correct positioning the Gap Jumper Leads are colour coded Red for positive and Blue for negative.

(This is an LUL colour requirement which could be tailored to suit other rail networks)


The LCS Gap Jumper Lead design incorporates the following features:

A shoe assembly that houses the conduction plate with integral magnets to suit various conductor rails, the cable connection point, cable restraint gland and conductor rail location guides.

The conduction plate is made from plated Brass to provide good corrosion resistance.

Connection force and stability assisted by the use of magnets. (Previously only the weight of the shoe with support of the cables by the operator)

Magnets are located within the conduction plate to enable the magnetic field to interact with the conductor rail/s

An insulated lifting handle is positioned towards the top of the connection shoe to allow easy positioning on the conductor rails.

The supply cable enters the shoe assembly horizontally (previously the cable entered via the top of the shoe assembly, hence the need for support by the operator)

The design allows the re-use of existing cables.

The lift handle allows the removal of the shoe by tilting the assembly to disconnect the magnetic forces. Lift of force 16kgf.

The rail guides also serve to provide a barrier by distance to the magnetic field.

The Gap Jumper shoe fits all 4 of the Conductor Rail profiles used by London Underground including the composite Stainless Steel / Aluminium rail.


The cable connection is made directly to the top of the conduction plate.

Positive Shoe 1 x 50mm2 Copper Cable

Negative Shoe 1 x 50mm2 Copper Cable


< Back to Railway Products & events